View Post

DIY Adirondack Chair (with pull-out footrest)

In Tutorial by admin

Are these the most comfortable wooden chair that you’ll ever sit in? Of coarse they are, although I may be a little biased. It’s my Adirondack Chair build, but done entirely with just 6 handheld power tools (not table saw, bandsaw, etc.)! This time I also added in a brand new pull out footrest that collapses inside the chair so …

View Post

“The Giving Tree” Power Carved Log Bench

In Tutorial by admin

It’s not often that I get to do a limited tools projects (this one is about as good as that gets). It’s also even less often that I just start a project with no plan from the beginning. I figured why not just hit both at the same time while I was out hanging out with Jimmy Diresta for the …

View Post

Giant Baseball Chair (from 2x4s)

In Tutorial by admin

Thanks to Arbortech for supporting what I do!! ► TURBO Plane – http://bit.ly/2upf82w ► Power Chisel – http://bit.ly/2I4hBBv ► Contour Sander – http://bit.ly/2pDVs5g It’s that time of the year and baseball is back this week!! The grass is finally turning green again and what better way to celebrate than by building a giant 3′ diameter baseball, Jackman style. Other than the …

View Post

How To | Build the Ultimate Adirondack Chair

In Tutorial by admin

The Jackman Works adirondack chair is back! This time something a little different with a walk through video. I love how many people are using my plans to build these for themselves and I get a lot of questions so I figured this build needed a more detailed video. This was my last batch in the shop in Rhode Island, …

View Post

Pallet Wood Slat Bench

In Tutorial by admin

This 100% reclaimed bench is a piece made for Carolina Shoe who is planning on using this for all sorts of different display purposes. They tell me this bench is going to be more well traveled then me. So this was constructed from a total of about 8 pallets (Red Oak, White Oak, Pine, Poplar, Aspen, Mahogany, Cherry, and Maple) …

View Post

Adirondack Chair Sextuple

In Uncategorized by admin

HUGE thanks to my top patrons – Leif Hietala, Jeff Worley, and Robb Albritton You’ll notice a few pieces of shop furniture seem to be missing. I’ve been sitting on this footage since this summer not entirely sure what I wanted to do with it since I already have 2 adirondack chair videos. I decided to give it an edit …

View Post

Adirondack Chair Pair Build

In Tutorial by admin

►Plans available here: http://www.jackmancarpentry.com/Plans/adirondack-chair ►Music by Blue Wednesday: http://soundcloud.com/bluewednesday ►More project photos: Coming soon ►Purchase chairs here: http://www.etsy.com/listing/217375592/ The most comfortable Adirondack chair you will ever find! The chairs are made from CVG (clear vertical grain) cedar and finished with 3 coats of spar urethane.

View Post

Curvy Plywood Stools

In Tutorial by admin

These stools were each made from a single sheet of poplar plywood. Each is laminated from a total of 80 pieces – the layers are 5 pieces each, mirrored with each layer, creating a “box joint” at the corners. The seats were carved out with a router jig, the side cut with a skill saw, and the rest of the …

View Post

Building an Adirondack Chair

In Tutorial by admin

The most comfortable Adirondack chair you will ever find! This is a special design with a curved back and curved seat that makes it hard to believe you’re sitting in a wooden chair. The chair is made from CVG (clear vertical grain) cedar which always creates a beautiful finished product.